Looking for a correct 1966 GT350 automatic slip yoke if anyone has an extra they can sell for a car I am working on.
Reference photos here probably the easiest to explain. Email or message me if you have anything.
Marcus
marcus@anghelrestorations.com
(https://live.staticflickr.com/7895/33674758938_b774703cf9_z.jpg) (https://flic.kr/p/TiHWC3)Tube Yokes (https://flic.kr/p/TiHWC3) by Marcus Anghel (https://www.flickr.com/photos/154714213@N02/), on Flickr
(https://live.staticflickr.com/7897/40585397053_a6580f5c39_z.jpg) (https://flic.kr/p/24QoLz4)1965-66 Slip Yokes (https://flic.kr/p/24QoLz4) by Marcus Anghel (https://www.flickr.com/photos/154714213@N02/), on Flickr
Hi Marcus,
A while back Kieth Champine and I were comparing the stampings on the slip yokes on our Hertz cars. 6S1568 has its original one, however that stamping is just a wee bit off center which makes it a little difficult to read. Later, Kieth put together a visual aid so one could see what he believes is the difference between an assembly line yoke for an automatic equipped car versus a four speed. You can always PM Kieth to discuss his findings. Attached are his document, and a photo of my yoke. I hope this helps you identify what you need. Denny
6S1757 (4 speed) had the 22083-J3 slip yoke when I bought it in 1987, I believe it's original but no way to know for sure.
Climbed under 6S373 4-speed (took upside down photos with the yolk number facing up) and it's
22067-J
Pretty sure it's original, Looks about as old as Everything else
Cheers
GT350Lad,
Didn't check the Registry, C4 or 4-speed?
Thanks,
Kieth
Quote from: SFM66H on April 07, 2019, 11:34:28 PM
GT350Lad,
Didn't check the Registry, C4 or 4-speed?
Thanks,
Kieth
Sorry Keith, I amended my original post, she is a 4 speed. And sorry Marcus for Hijacking your original post. This topic is interesting, should we move it over to its own topic?
Thanks guys...yes interesting topic. But still trying to get the correct yoke here. Hoping someone has an extra one out there.
Quote from: anghelrestorations on April 08, 2019, 10:57:12 AM
Thanks guys...yes interesting topic. But still trying to get the correct yoke here. Hoping someone has an extra one out there.
Thanks Marcus, I am sure someone will have one for you
Cheers
Located a few now...thanks for those who got in touch.
Problem solved. On to the next project.