I'm planning on spraying my coupe's roof with SEM rock coat to simulate what the EXP500's had. One thing I haven't figured out yet is how to simulate the seam lines that sit over the driver and passenger sides of the roof. Can anyone shed light on that for me?
By the way, I'm new to the forum. Not a Shelby owner but hope to be some day. I am building a 1968 coupe EXP500 clone/tribute(?). But my version will be more of a cross between a GT350 and the EXP. I'm calling it the "EXP350".
You can get 3M Body Side Molding Tape in several Widths, I think that is what they used. I could be wrong but that is what it looked like to me.
I found a can of vinyl top paint in an old ford dealership back in the 80s and it had a ford c7 part number in a ford autolite can. Billups got it from me for little red and its the only one i ever seen and it was nos never opened can so it came out in 1967.
Quote from: tesgt350 on November 18, 2026, 09:40:22 AMYou can get 3M Body Side Molding Tape in several Widths, I think that is what they used. I could be wrong but that is what it looked like to me.
That's a great idea. I'll certainly look into that!
Quote from: Special Ed on November 18, 2026, 09:46:04 AMI found a can of vinyl top paint in an old ford dealership back in the 80s and it had a ford c7 part number in a ford autolite can. Billups got it from me for little red and its the only one i ever seen and it was nos never opened can so it came out in 1967.
I didn't know that was an actual Ford thing! That's awesome. From what I can tell, it's basically a rock chip coating, correct?
The kits they sold back in the day included a thick 1/16"x1/2" roll of tape to do the seams. There were roll on and spray kits in various colors. Use this stuff not the tar based body schutz. You could also get it sprayed with truck bedliner but it's thicker.
https://www.3m.com/3M/en_US/p/d/b40071593/
Vinyl tops were meant to mimic the upscale look of a convertible top on a non convertible car. I can understand trying to copy this look for a tribute car. There are some things that just because you can do them you shouldn't. Just my opinion but this poser spray on vinyl top is one of them, others may have a different opinion. It takes all kinds to make a world. ;)
Quote from: Bob Gaines on November 18, 2026, 01:11:42 PMVinyl tops were meant to mimic the upscale look of a convertible top on a non convertible car. I can understand trying to copy this look for a tribute car. There are some things that just because you can do them you shouldn't. Just my opinion but this poser spray on vinyl top is one of them, others may have a different opinion. It takes all kinds to make a world. ;)
Thank you for saying what needed to be said...... Vinyl top and Mustang are not words that should be used in the same sentence. But they were an option and you can buy real vinyl repops for a couple hundred.
Back in the late 60's my dad did the spray one vinyl top on one of his builds. Mid 60's Chevy II he put a V8 in. This was before they had a V8 option. I recall there were strips premade that simulated the factory like seams. They were rounded so as to not have really sharp edges. Given the time period it didn't look badly but looking back not sure why he choose to do it on that car.
Good luck with your project
Back in the day I saw quite a few Mustang Coupes with vinyl tops including many GTs.
Personally I liked the look. The regular painted coupe roof looked cheap by comparison.
IF I was going to build a coupe, now not only would I not spray the roof, but neither would I use the silly EXP nomenclature either? I sould also add, I would not be looking for a green interior either. As Bob says, to each their own.
I have seen vinyl tops on fastbacks before and look odd but they look better on coupes .
Another possible idea is a two tone paint job. Cougar's had that option - not sure if any Mustang coupes came that way.
Chrome or aluminum trim in the place of the black or white trim used on vinyl top cars.
- Phillip
My coupe was originally an Acapulco blue car with factory vinyl. It's a nice contrast having black on blue. I plan to keep it that way. But the spray on vinyl, to me, is a win/win. Especially with the higher end rock chip sprays. It'll resist fading, moisture penetration, and won't peel up in 20-30 years.
As far as the interior goes, I've already reupholstered my two tone blue interior to black deluxe comfort weave (with seat buttons). I've got the mustangponycar Shelby center console with original SW gauges.
But, I really do appreciate the insight and look forward to sharing the progress with you all. I do have a build page on the vintage Mustang forum titled "another 68 coupe build" if anyone wants to check it out.
Penske even had an affinity for vinyl roofs on his Sunoco Camaros. LOL
Quote from: csxsfm on November 19, 2026, 09:02:06 AMPenske even had an affinity for vinyl roofs on his Sunoco Camaros. LOL
It was helpful to cover the holes left from the acid dipping ;-)
I kinda get it. It was built with a spray on vinyl top. And that is why you are asking about it here.
On my tribute Lil'Red, my base car (67 GTA)was built with a vinyl top, so I used a replacement vinyl roof. I started the conversion before the real one was found with the spray one top. Otherwise, I too might have been looking into the spray on top. (look up "Roddster's tribute a few threads down)
I've seen your post on the Lil' Red Tribute. Outstanding car! I was wondering why you hadn't sprayed the top but you just answered my question.