Print Page - 4 speed shifter lower rubber boot

Title: 4 speed shifter lower rubber boot - 69 GT500
Post by: TS69GT500 on November 08, 2026, 07:57:52 AM

I want to install a repro lower rubber boot for the 4-spd shifter.
Not sure how to correctly attach it.

Does the upper lip of the boot, with the 4 holes attach underneath the floor opening or is it somehow worked above the shifter opening and secured under the upper boot?
My car did still have the original when purchased but it was shredded and barely hanging on.
I was unable to determine how it was secured.

Thanks,
TonyS

Title: Re: 4 speed shifter lower rubber boot - 69 GT500
Post by: Bob Gaines on November 08, 2026, 09:22:26 AM

Quote from: TS69GT500 on November 08, 2026, 07:57:52 AMI want to install a repro lower rubber boot for the 4-spd shifter.
Not sure how to correctly attach it.

Does the upper lip of the boot, with the 4 holes attach underneath the floor opening or is it somehow worked above the shifter opening and secured under the upper boot?
My car did still have the original when purchased but it was shredded and barely hanging on.
I was unable to determine how it was secured.

Thanks,
TonyS

To properly attach the lower boot the upper lip folds up over the shifter opening lip inside the passenger compartment and is secured under the upper shifter boot.

Title: Re: 4 speed shifter lower rubber boot - 69 GT500
Post by: TS69GT500 on November 08, 2026, 10:10:02 AM

Thanks Bob,

TonyS

SAAC Forum

SAAC HQ => Concours Talk => Topic started by: TS69GT500 on November 08, 2026, 07:57:52 AM