Print Page - Identify this pumpkin

Title: Identify this pumpkin
Post by: Coralsnake on October 30, 2026, 07:31:29 PM

(https://www.saac.com/forum/gallery/8-301026192937.jpeg)

Can anyone what company made this nodular case?

Title: Re: Identify this pumpkin
Post by: Jhockman on October 30, 2026, 07:44:58 PM

Canton Forge ?

Title: Re: Identify this pumpkin
Post by: Road Reptile on October 30, 2026, 08:28:15 PM

Hi Pete,
This is Michigan Casting Company. From what I understand they started when Dearborn Iron Foundry
Finished. They were not casting in the 1960's and most plants that worked with cast iron have closed or changed to aluminium. Hope this helps.
R.R.

Title: Re: Identify this pumpkin
Post by: Coralsnake on October 31, 2026, 08:46:17 AM

Thanks guys

Title: Re: Identify this pumpkin
Post by: pbf777 on October 31, 2026, 12:16:25 PM

Is that a "Nodular" case? ??? O.K., the picture provides for a somewhat limited observation but, if I'm holding my head and thinking right, the ribbing doesn't seem correct for such? :-\

If it actually is, Ford did reintroduce the "N" case for the 1985 F150 "H.O." trucks so 'maybe' that's a possibility? ???

Scott.

Title: Re: Identify this pumpkin
Post by: Scode67FB on November 01, 2026, 01:18:42 AM

Quote from: pbf777 on October 31, 2026, 12:16:25 PMIs that a "Nodular" case? ??? O.K., the picture provides for a somewhat limited observation but, if I'm holding my head and thinking right, the ribbing doesn't seem correct for such? :-\

If it actually is, Ford did reintroduce the "N" case for the 1985 F150 "H.O." trucks so 'maybe' that's a possibility? ???

Scott.

My thoughts as well. From the angle, it doesn't appear to be a Nodular.

SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: Coralsnake on October 30, 2026, 07:31:29 PM