SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: SCJSTU on July 06, 2026, 09:54:06 PM

Title: Correct hood pin and cable orientation
Post by: SCJSTU on July 06, 2026, 09:54:06 PM
Can someone post a picture of the correct direction of hood pins and how the cables are routed over the hood

Thanks, Stuart
Title: Re: Correct hood pin and cable orientation
Post by: Bob Gaines on July 06, 2026, 10:21:30 PM
Quote from: SCJSTU on July 06, 2026, 09:54:06 PMCan someone post a picture of the correct direction of hood pins and how the cables are routed over the hood

Thanks, Stuart
First the pin plates are clocked so the rivets are at 12,3,6 9. The pin post is clocked so that the hole is pointed at a 45 degree toward the hood scoop. You adjust the height of the post so that the hole is slightly above the plate  when the hood is fastened down . You should be able to push down one of the rivets on the pin plates with your thumb to expose the pin hole above the plate . You do not want the pin post adjusted down so close to the surface of the plate that the click pin drags across the plate scratching it. The cables are typically secured on the top edge of the grill on early cars and on the forward edge of the pin support bracket on later cars. I hope this helps.   
Title: Re: Correct hood pin and cable orientation
Post by: JD on July 06, 2026, 11:14:15 PM
This thread might help...

https://www.saac.com/forum/index.php?topic=11257.msg95183#msg95183

Also here is a promotional photo from back then showing the orientation Bob described...
Title: Re: Correct hood pin and cable orientation
Post by: Steve McDonald Formally known as Mcdonas on July 07, 2026, 09:29:37 AM
Quote from: Bob Gaines on July 06, 2026, 10:21:30 PM
Quote from: SCJSTU on July 06, 2026, 09:54:06 PMCan someone post a picture of the correct direction of hood pins and how the cables are routed over the hood

Thanks, Stuart
First the pin plates are clocked so the rivets are at 12,3,6 9. The pin post is clocked so that the hole is pointed at a 45 degree toward the hood scoop. You adjust the height of the post so that the hole is slightly above the plate  when the hood is fastened down . You should be able to push down one of the rivets on the pin plates with your thumb to expose the pin hole above the plate . You do not want the pin post adjusted down so close to the surface of the plate that the click pin drags across the plate scratching it. The cables are typically secured on the top edge of the grill on early cars and on the forward edge of the pin support bracket on later cars. I hope this helps.   

This is why the forum is so great. A question asked and the answer is given by some who has done the research and has the answer
Thank you to all who share their knowledge to the rest of us
Title: Re: Correct hood pin and cable orientation
Post by: SCJSTU on July 07, 2026, 09:33:58 AM
yes, most awesome...thanks fellas