I have noticed on the 69-70 GT 500 that the passenger side shock tower has a hole for some type of wiring harness clip. Trying to determine what type of clip would go there or if the ones I have seen are incorrect and there isn't suppose to be a clip. Any input would be appreciated.
Pete
Yes that upper hole would have received a standard push in plastic strap like many other points in the engine compartment like is shown in your picture with the two possible ends at the adjustable/loose end. Now what it retained or included in the strap appears to differ from what is shown in your picture.
Jeff,
Do you know or can you tell.what is retained in that clip?
Pete
Looks to be, lo
Quote from: cob428 on June 08, 2026, 04:18:59 PMJeff,
Do you know or can you tell.what is retained in that clip?
Pete
Believe and it looks like the wire loom from the firewall to battery area and the vacuum hose is your car has the AC and tilt, that travels to the vacuum can under the battery box. If not its just the one. If you have a convertible that would add an additional wire to the group for the power top.
Lots of things in the way if the car is fully assembled that block nice clear pictures of the area. If your wondering about the picture on the left the "post" for the wire retainer is in the lower/tighter hole, just an odd angle but it shows up in another picture I have from the same car but chose this picture for other reasons.
Green arrow - Wire loom
Yellow arrow - Convertible power top wire
Purple arrow - Vacuum hose
(https://www.concoursmustang.com/forum/gallery/23/6-080626174521-234212173.jpeg)