Looking for an OEM rebuildable 289 10.5" pressure plate (part number C3OZ-7563-A) that has the arms wih counterweights and ends wirh the hex head screws on the ends. Mainly just interested in the plate for the hat and the attached arms. Need a piece with no severe rust, pit free with no un natural marks
I have this unidentified unit in my inventory. It may be what you are looking for but the plate measures 10 3/8" rather than 10 1/2". I am not aware of any Ford clutch of this size, so maybe they rounded up/down?
Photos attached. I invite anyone having more information to comment.
Bill Collins
717-648-6600
bill@bcfords.com
I've only inspected 3 HP pieces but all are right at 10.5." Most of them will have testing marks on the face that are like 1/16" round dots as seen in the below photo. This particular one has a dot in three places. Measuring the distance between the pair of mounting holes on each of the three legs of the steel hat should be right at about 3 1/8" from center to center. Also, the early HP pieces will have all light green springs.