Hey Guys,
So I'm about to install my new fuel line from the tank forward and I can't seem to remember how my old line was attached to the body from the tank to the front torque box area.
Anyone have some pics to help me remember ? Its an automatic 500KR conv.
Thanks, Tom
I don't have a picture handy but inside DS frame rail near vent hose is held by clip and bolt. There is a spring clip on the gas tank opening drop. Where it crosses torque box there is metal guard held by 3 bolts.
See attachments for some info that could help
OK Thanks for the pic, here is what's confusing me, my car does not have the guard and there are no holes in the floor where a guard would have been bolted to. This is an early KR conv.(bucked 4/24/68) with an automatic.
Could it have possibly had the fuel line that would have been installed on a 4spd (staggard shock) car instead ?
Or possibly the guard was just never installed ?
Holes are present even on staggered shock car so no. Sound like maybe torque box replaced?
OK good clue, I'll have to look a lot closer to see if my body guy filled them by mistake which is what i'm starting to think.
Thanks Tim,