Need a little help on the vacuum lines to the canisters under the battery and hood hinge. For some reason a previous owner removed all the vacuum lines. The 428 has tilt and air. I have the diagrams but they don't seem to make sense. There is one vacuum port on the can under the battery tray and two on the can under the hood hinge (large and small ports)
Single (tilt) goes to one way tee near firewall. Pull side of the tee (single) goes to brass block on rear of intake. Last port off tee goes to tilt solenoid under dash. AC large nipple goes to brass block, small nipple goes through firewall to Heater control
Quote from: TLea on Today at 03:51:10 PMSingle (tilt) goes to one way tee near firewall. Pull side of the tee (single) goes to brass block on rear of intake. Last port off tee goes to tilt solenoid under dash. AC large nipple goes to brass block, small nipple goes through firewall to Heater control
Thanks.. which vacuum line goes to the can under the battery tray?