SAAC Forum

SAAC Forum => SAAC Forum Discussion Area => Topic started by: 6s1432 on December 06, 2025, 02:30:57 PM

Title: HEH S toploader 4 speed
Post by: 6s1432 on December 06, 2025, 02:30:57 PM
I just picked up this transmission. Was it ever used in anything except a very early 1964 hipo mustang? Not sure what to do with it. Mark
Title: Re: HEH S toploader 4 speed
Post by: S7MS427 on December 06, 2025, 11:21:05 PM
Mark, My toploader tag application chart on my website lists this as a close ratio box (P/N C5ZZ 7003-E) for a '65 Mustang before 8/20/1964. No other application listed. Hope this helps.
Title: Re: HEH S toploader 4 speed
Post by: JohnSlack on December 06, 2025, 11:28:59 PM
Quote from: S7MS427 on December 06, 2025, 11:21:05 PMMark, My toploader tag application chart on my website lists this as a close ratio box (P/N C5ZZ 7003-E) for a '65 Mustang before 8/20/1964. No other application listed. Hope this helps.

Is it a 25 spline output shaft transmission?
Title: Re: HEH S toploader 4 speed
Post by: S7MS427 on December 07, 2025, 04:27:47 AM
John, No, HEH-N (C5OZ 7003-N) is listed as a 25 spline CR gear box for a 1965 Hi-Po 289 Fairlane, since no such note exists for the HEH-S transmission, that one must be a 28-spline unit. The information source is the Ford MPC. This chart is published on my website. Again, I hope this helps.