Text only | Text with Images

SAAC Forum

The Cars => 1969-1970 Shelby GT350/500 => Topic started by: rdmgt500 on August 07, 2025, 06:16:59 PM

Title: Side Scoop Z Clip Dimensions
Post by: rdmgt500 on August 07, 2025, 06:16:59 PM
Going to have to fab the Z clips for the qtr panel side scoops (2 per scoop). Would anyone be able to provide the dimensions or have a dimensioned drawing of the clip? Seems Branda stopped carrying them a few years back. Thanks!


Sccop_Clip.JPEG
Title: Re: Side Scoop Z Clip Dimensions
Post by: cob428 on August 10, 2025, 12:32:40 PM
The z clip measurements are as follows
Width 5/8"
Length that attaches to body 11/16
Turn up 5/16
Length that scoop attaches to 1/2

I made some for my 69 shelby
Original on the right, the one I made on the left

Pete
Title: Re: Side Scoop Z Clip Dimensions
Post by: rdmgt500 on August 11, 2025, 09:21:33 AM
Thank you Pete!

Bob
Title: Re: Side Scoop Z Clip Dimensions
Post by: Dennis Y on August 12, 2025, 08:51:35 PM
Hey Pete, ever think of a side gig?
Title: Re: Side Scoop Z Clip Dimensions
Post by: cob428 on August 13, 2025, 08:18:40 AM
Yes, but no time. Still working full time.
Title: Re: Side Scoop Z Clip Dimensions
Post by: Dennis Y on March 11, 2026, 09:18:39 PM
What kind of material did you use for the clips? Thanks.
Title: Re: Side Scoop Z Clip Dimensions
Post by: cob428 on March 12, 2026, 04:24:09 PM
went to Home depot and got flat stock and just started bending and shaping by hand. The angles were the most difficult, I do not have any type of metal bending or shaping machines.

Pete
Text only | Text with Images