Greetings,
I've got what I suspect is the original driveshaft from 6S383 (I sold the car a few years ago). Does it have any value (here or to the K-code guys) or does it get cut up and recycled? The car was converted to a T5Z prior to my ownership.
Thanks....
.
It likely does especially if its not pitted and does not need rebalancing since often drive line shops remove original weights and replace them with different ones.
Internal clip driveshaft (65/66)components are hard to find now days and consequently have value.
It also has value if the yokes have not warn out and the u-joints are tight. I have an original drive line but the forward end yoke is warn out. The u-joint cap can be rotated in the yoke. Do I cut off the warn yoke and have a better yoke welled on or just have another drive line shortened?
Best of luck
Cory
Its worn.......