SAAC Forum

The Cars => 1966 Shelby GT350/GT350H => Topic started by: 6s1640 on March 29, 2025, 11:34:59 PM

Title: Common date codes - HiPo Fan Blades
Post by: 6s1640 on March 29, 2025, 11:34:59 PM
Hi all,

I was curious what might be the common date codes for the HiPo 289 Special Fan blades and what might be the latest date code.  I have seen:

Stamped on blade front side:
  A65 (Input from Rickmustang)
  B65
  C65
  E65  (Input from S2MS)
  F65  (Input from S2MS)
  G65 (Input from S2MS)

Stamped on blade back side:
  J65
  L65
  A66
  C66

I expect these blades were made in batches, so it likely there is not a dated blade for each month in 1965 and 1966. What is the latest date code out there?

What do you have?


I will also note, the date code and part number stamping on the early blades are on the front, difficult to see when installed in a car with fan shroud.  The later blades are stamped on the back and can be easily seen.  See attached images.
Thanks

Cory
Title: Re: Common date codes - HiPo Fan Blades
Post by: GT350Lad on March 30, 2025, 03:18:13 PM
I'll Have a look today and let you know Corey
Cheers
Title: Re: Common date codes - HiPo Fan Blades
Post by: Rickmustang on March 30, 2025, 04:47:04 PM
A65
Title: Re: Common date codes - HiPo Fan Blades
Post by: J_Speegle on March 30, 2025, 06:11:43 PM
Cory are you focusing just on 66 production or a wider look at 64-66 with the early style K code fans?

Just wanted to know where to start and stop and sampling
Title: Re: Common date codes - HiPo Fan Blades
Post by: s2ms on March 30, 2025, 06:34:14 PM
Hi Cory,

I've also seen G65 plus have in my notes an E65 and F65 being for sale in the past.

Dave
Title: Re: Common date codes - HiPo Fan Blades
Post by: 6s1640 on March 30, 2025, 10:55:34 PM
Quote from: J_Speegle on March 30, 2025, 06:11:43 PMCory are you focusing just on 66 production or a wider look at 64-66 with the early style K code fans?

Just wanted to know where to start and stop and sampling

Hi Jeff,  I was mostly focusing on the 65-66 GT350 K-codes engines.  But I'm open to any knowledge you want to share.  I know the really early HiPo fan blades are also a little different.

Thanks

Cory
Title: Re: Common date codes - HiPo Fan Blades
Post by: 6s1640 on March 31, 2025, 12:15:58 AM
Quote from: s2ms on March 30, 2025, 06:34:14 PMHi Cory,

I've also seen G65 plus have in my notes an E65 and F65 being for sale in the past.

Dave

Hi Dave,  Thanks for the input.  Do you know if all three of your blades were marked in the front?

Cory
Title: Re: Common date codes - HiPo Fan Blades
Post by: s2ms on March 31, 2025, 01:57:38 AM
I've only seen photos of the G65 from an old post on the VMF, no other info on the other two...
Title: Re: Common date codes - HiPo Fan Blades
Post by: J_Speegle on March 31, 2025, 10:20:06 PM
OK looked through most of my stuff (low hanging fruit  ::)  and came up with these

Did find one that had a K85 date on it. Not sure of the source

Tried to also include FoMoCo with and without oval around it. Sometimes the FoMoCo are on the same fan blade as the engineering number and date. On others they are on different blades. Didn't include that detail

5E      Hipo Fan Survey      
   Fan Date     Stamped   S C3OA-C?   
63   L63              Front    No   
64   G64              Front    No   No Oval Above
64   J64              Front    No   No Oval Above
64   L64              Front    No   
65   A65              Front   No   No Oval Above
65   C65              Front   No   No Oval
65   E65         
65   F65              Front   No   
65   G65         
65   J65              Back   Yes   
65   L65              Back   Yes   
66   A66              Back   Yes   
66   C66              Back           Oval FoMoCo above
66   J66              Back      Yes   
67   A67              Front    No     Oval FoMoCo above
67   J67               Back      

Hope this helps
Title: Re: Common date codes - HiPo Fan Blades
Post by: 6s1640 on April 03, 2025, 12:00:40 AM
Hi Jeff,

That's amazing. Thank you for doing that.   When I get home, I'll sort through both our lists and see which ones are missing.

Cory
Title: Re: Common date codes - HiPo Fan Blades
Post by: NC TRACKRAT on April 04, 2025, 10:20:40 AM
Cory-Sending you a PM with information on the blades I have to add to your chart.
Regards,
Stan
Title: Re: Common date codes - HiPo Fan Blades
Post by: 6s1640 on April 24, 2025, 03:43:29 AM
Here is an updated list.  I still need to add traditional info, but here is the list of observed date coded HiPo fan blades.

Cory