Text only | Text with Images

SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: Kyle on January 02, 2025, 03:59:45 PM

Title: WTD: 67 Shelby Parts
Post by: Kyle on January 02, 2025, 03:59:45 PM
Hi All,

Happy New Year!

I am looking for these Original parts for a 67 GT500. I need all Original parts NOS or Used in a Nice condition.

:AUTOLITE sender C6DZ-10884-B dated 6H-6L with red insulator

:NOS C7ZZ-3A713-B P/S return hose

:NOS bypass hose from intake to water pump

: (10) Original RBW BOLTS for valve covers

: (10) intake bolts with head markings number 5

: (8) intake to carbs studs

: Pink alternator spacer to Engine block

: Nice stamped C5AF-10A352-J2 alternator pulley

: Power Brake Vacuum Tube that goes on the back of the intake

: NOS Autolite radiator cap chrome rivet RS-12 13#

: NOS C1AZ-8591-A water pump repair kit

: 1 or 2 775\C/ crimp clamps

: 1 or 2 745\C/ crimp clamps

: 1-8 590\C/ crimp clamps

: C6 31 spline rear axle shafts

: Throttle Return Spring

: Intake PCV basket and Filter

: engine gauge feed/Sender wiring harness

PM sent or Email kylezammit123@gmail.com if anyone have anything or someone know who have something.



Thanks Kyle.
Title: Re: WTD: 67 Shelby Parts
Post by: Kyle on February 09, 2025, 09:28:02 AM
Still looking to find these parts. Found the Alternator pulley.
Title: Re: WTD: 67 Shelby Parts
Post by: 68cobra427 on February 10, 2025, 03:43:58 PM
Reach out to Branda performance 1-800-458-3477
Title: Re: WTD: 67 Shelby Parts
Post by: 68cobra427 on February 10, 2025, 03:45:28 PM
JD Larson 1-701-624-3673
Title: Wanted: PS hose
Post by: Kyle on March 25, 2025, 04:19:09 PM

Hi all

I am looking for a NOS C7ZZ-3A713-B power steering return hose.

Thanks Kyle.

Title: Re: WTD: 67 Shelby Parts
Post by: Kyle on March 25, 2025, 04:26:27 PM
Found rear 31 rear axle shafts. Still looking for the other.
Title: Re: WTD: 67 Shelby Parts
Post by: brandosaac on March 28, 2025, 01:48:46 PM
looks like you found axles,
 but if they dont pan out for you let me know, I have a set
Title: Re: WTD: 67 Shelby Parts
Post by: TLea on April 09, 2025, 10:34:25 AM
Kyle, I have 590 clamps. On the intake bolts the 5 is most common but not only ones used. The short ones can have the RSC mark and I have seem several of the longer ones of the castellated type used on the fuel log. They need to be the ones with the letters not the unmarked like AMK has
Title: Re: WTD: 67 Shelby Parts
Post by: Bob Gaines on April 09, 2025, 11:11:21 AM
Quote from: TLea on April 09, 2025, 10:34:25 AMKyle, I have 590 clamps. On the intake bolts the 5 is most common but not only ones used. The short ones can have the RSC mark and I have seem several of the longer ones of the castellated type used on the fuel log. They need to be the ones with the letters not the unmarked like AMK has
F , 5 , and L5 are the most common makers mark on the GT500 intake bolts. The markings were typically seen being used during different times in production.
Title: Re: WTD: 67 Shelby Parts
Post by: Kyle on April 09, 2025, 12:59:36 PM
Thanks both of you! Tim I need 590\C/ not 590\E/. Can you send me an Email with pictures the ones you have please?  On the intake bolts if you have one type for sale let me know also please?
Title: Re: WTD: 67 Shelby Parts
Post by: TLea on April 14, 2025, 03:25:05 PM
mine are all the E
Title: Re: WTD: 67 Shelby Parts
Post by: Kyle on April 14, 2025, 03:50:23 PM
Sorry Tim. I need them \C/.
Text only | Text with Images