Hi all. I am looking for a good original driver door for 67/68.
I am in Canada but I have several contacts/adresses in USA if needed.
Join together at Ford Carlisle 2025 could also be an option if shipping is an issue.
TKS
Patrick
1967 and 1968 doors are different. The are interchangeable, but are not the same.
There are also standard doors and deluxe doors
Pretty sure I have a rust free bare shell, no dents or damage. I'll send you a PM with my contact
Shawn
I am still looking. I would consider a NOS skin at this point
Patrick
I am in Georgia
Think I have a 67 standard trim drivers door if interested
Quote from: Coralsnake on August 26, 2024, 07:15:29 AM1967 and 1968 doors are different. The are interchangeable, but are not the same.
There are also standard doors and deluxe doors
Good next project for your website. Door differences. Or should we post it here so everyone can search for it. I think I have 3 different sets of doors at the moment that I can take pics from.
I will post some pictures
(https://www.saac.com/forum/gallery/8-010924142236.jpeg)
Here is a 1967 and a 1968 door. The 1967 door is on the left. The 1968 door has a different in this opening
Notice the cutouts circled
They will interchange, but the internal window regulators are also different.
Additionally, a deluxe door will have a cut out for the deluxe interior light at the bottom of the door, the standard door will not
The deluxe door is on the left, the standard type door on the right. Mixing doors may cause issues if you are installing some thing like 68 deluxe, door pulls
Also the hinges are different on early 67 until January they were casted and later then the stamped version came out.
Thanks! Good information
Vent window frames also differ.