Hi guys, My Swedish friend Roland is looking for a set of original pulleys for his 67 GT500.
Crankshaft pulley with three grooves for belts and the Water Pump pulley with two grooves for belts.
Thanks for any help to locate these items.
Texas Swede
Quote from: texas swede on June 14, 2024, 12:23:04 PMHi guys, My Swedish friend Roland is looking for a set of original pulleys for his 67 GT500.
Crankshaft pulley with three grooves for belts and the Water Pump pulley with two grooves for belts.
Thanks for any help to locate these items.
Texas Swede
Waterpump and crank pulley is different between A/C and non A/C
Thanks Bob,
The car has no A/C.
Texas Swede
Bo ,cast iron crank pulley is C1AE-6312-A . Water pump pulley is C6AE-F . Engineering numbers are metal stamped/formed into the pulleys so they should be easy to identify.
Still looking for the GT500 Crank Pulley. No A/C car.
Thanks, Texas Swede
Hello,
The C1AE crank pulley mentioned is the crank single grove balancer, right? The "outer pulley" mostly covers that pulley/balancer and is stamped steel, no?
Mike
Quote from: Mike_Senar on March 11, 2025, 08:46:25 PMHello,
The C1AE crank pulley mentioned is the crank single grove balancer, right? The "outer pulley" mostly covers that pulley/balancer and is stamped steel, no?
Mike
No, the C1AE-A is a cast iron accessory pulley that bolts on to the C6AE balancer that has a single belt groove and is for a non A/C car. The accessory pulley for a A/C car is made of stamped steel .
Bob,
Gotcha. I was amiss on the non a/c part!
Mike
I have the crank pulley. This one is very hard to find and near impossible to find in this condition. The last time I looked these up on Ebay, the sellers were asking $250 and higher. Most of them had chips missing. I just checked again and didn't find any. I want $250 for this one, shipped and insured.
(https://i.postimg.cc/685K5tQk/temp-Imagefkfnx-F.avif) (https://postimg.cc/685K5tQk)
Just food for thought: the definition of "Sellers" doesn't absolutely define that they have sold anything, actually just the position in the relationship 'effort' or process of transferring property from one owner to another.
So for clarity: "asking" prices might not actually represent market or actual trading values; .............but 'maybe' it's a good place to start. :)
Scott.
Hey Texas Swede, it looks like Roland might finally catch a break!
Scode67FB claims to have that rare-as-a-unicorn-in-white-socks crank pulley and is asking $250 for it, shipping and insurance included. Considering that eBay either has none or they're listed for crazy prices, this might be a decent deal.
Of course, as pbf777 wisely pointed out, an "asking" price on eBay doesn't always reflect actual market value—but as the old Mustang traders say, "better a pulley in hand than two on the internet." 😉
It'd be a good idea to request detailed photos and clarify its condition, since some of these parts have seen more action than a hot rod on Route 66. Maybe Roland could even try to negotiate a bit?
Let us know how it goes! ;) (https://fora.warszawa.pl/)
Can you, please post some more pictures of the pulley from all angles.
I will call Roland and ask him if he is okay with the price.
Texas Swede
Thanks Bob,
Your knowledge is extremely useful as Roland and I now understood that the inner pulley is a part of the balancer
C6AE-6316-A which Roland will also need as the one on his car has completely worn-out rubber between the damper
and pulley.
Texas Swede
Quote from: texas swede on March 13, 2025, 03:06:54 PMThanks Bob,
Your knowledge is extremely useful as Roland and I now understood that the inner pulley is a part of the balancer
C6AE-6316-A which Roland will also need as the one on his car has completely worn-out rubber between the damper
and pulley.
Texas Swede
Dampner doctor can rebuild your old balancer. As a alternative Cobra Automotive made up some extremely nice repros that are close to original in appearance.
Thanks Bob,
Texas Swede
Here are two more pics that I have. If you want more, PM me a phone number and I can take a video of all the way around and text it to you.
(https://i.postimg.cc/Vdw1pjPL/temp-Image-NWDe-SI.avif) (https://postimg.cc/Vdw1pjPL)(https://i.postimg.cc/QHqs3Hjg/temp-Imager-Wy-CDm.avif) (https://postimg.cc/QHqs3Hjg)
I understand that the "asking" price isn't necessarily the "selling" price. I'm just using it as a guide. When a dozen sellers are asking prices within a certain range, I figure it might not be far off the mark. As I stated, $250 was the low end on the pricing and all of those showed damage. The one I have is nicer than one that was claimed to be NOS and about 1/2 the price.
Thanks for the pictures. I will send them to Roland and get his okay to buy,
Texas Swede
I talked to Roland and he gave his okay. How to you want to get paid, PayPal?
You can text me your PayPal ID to my I-phone. Number sent by message, I will send $250
Thanks for your help in this matter.
Texas Swede
Looking forward to get the pulley,
thanks.
Texas Swede
Got the pulley today and it is like NOS. Thanks, Scode67FB.
It was a pleasure doing business with you.
Texas Swede
Thank YOU. I'm glad it arrived safely. Since it still has to travel back to Sweden, make sure to keep it packed and padded as much as possible. The sharp edges on the cast iron chip very easily. As I stated before, almost all of the ones I've seen were chipped.