These are used original snakes from KR fenders and 69/70 vert 1/4 panels. All will clean up to show condition $300 pair email direct TimothyLea7@gmail.com
(https://hosting.photobucket.com/ef9791d8-96b1-4ef4-9b39-c5fafd28c59c/3bd8cdfc-594d-4f67-a265-89347a4c5d70.jpg?width=320&height=320&fit=bounds)
(https://hosting.photobucket.com/ef9791d8-96b1-4ef4-9b39-c5fafd28c59c/362a9694-687d-467d-abda-6fe2bc0befd0.jpg?width=320&height=320&fit=bounds)
Tim, I believe the curvature is different on the rear quarters of a 69-70 Vert from a 68 on the snakes(I got NOS varieties of the 69-70 FB and Vert snakes). I actually made up a little mold for quick check when looking for the vert emblems.
All 4 of those snakes came off 69 convertibles and are flat. There are 2 versions of 68 snakes and both are flat
Double checked. I have 8 all C9OB 16228 A engineering number. 4 perfectly flat, 3 slight concave, 1 convex. Curve so slight you would hardly notice
c9oz. 69 torino cobra snakes go on tailpanel and sides of torino. I bought a 69 torino cobra from original owner back in the 80s.