Text only | Text with Images

SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: myboss on March 19, 2024, 09:01:25 PM

Title: 10 X 2 1/2" DRUMS
Post by: myboss on March 19, 2024, 09:01:25 PM

   Looking for a good useable set ,  not at the end of there life .   Numbers don,t mattter, not going on a Shelby.

Dan
Title: Re: 10 X 2 1/2" DRUMS
Post by: TA Coupe on March 19, 2024, 09:36:33 PM
Do a search on this subjectAs it has been discussed before. I believe you can use ones from a 90s ranger is what was mentioned.

    Roy
Title: Re: 10 X 2 1/2" DRUMS
Post by: Bob Gaines on March 19, 2024, 10:13:44 PM
Cobra Automotive also sells a alternative      https://store.cobraautomotive.com/competition-rear-brake-drums/
Title: Re: 10 X 2 1/2" DRUMS
Post by: NC TRACKRAT on March 20, 2024, 09:14:21 AM
I've got one odd-ball KH 10x2-1/2 not marked FoMoCo if it will do you (or anyone else) any good.
Title: Re: 10 X 2 1/2" DRUMS
Post by: myboss on March 20, 2024, 11:23:52 AM
 

  NC TRACKRAT   Sent you a  PM

  Dan
Title: Re: 10 X 2 1/2" DRUMS
Post by: myboss on March 20, 2024, 11:27:19 AM


  Ranger drums wont work as the center hole is the wrong demension.  Someone make a ring for the axle ??

  Dan
Title: Re: 10 X 2 1/2" DRUMS
Post by: myboss on March 21, 2024, 03:35:33 PM

  Cobra Automotive has them , says they were machined in the USA but doesn't know in the were made here.  Don't want any "tiwanese willy" junk. Anybody have them on there car ???


Dan
Title: Re: 10 X 2 1/2" DRUMS
Post by: Rickmustang on March 21, 2024, 10:21:18 PM
I've been running them for years to save my originals. All Cobra Auto stuff is quality products.
Text only | Text with Images