4159 is off for a wheel alignment tomorrow.
My Shelby owners manual is for "1967 Shelby GT350/500" and states:
Caster 2 degrees positive
Camber 0 degrees
Toe-in 1/8in. total
Is it the same for a 68?
If not can anyone advise specs please, I tried searching but got lots of varying info.
Thanks in advance as always.
Caster will be fine between 1.5 and 2.5
Camber 0 is minimum, I generally try for .25 to .50+ with .25 more on drivers side to help compensate for road crown. 1/8 toe in perfect
Thanks Tim much appreciated. :)