Text only | Text with Images

SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: azdriver on July 06, 2023, 06:22:56 PM

Title: Fiberglass and body lines
Post by: azdriver on July 06, 2023, 06:22:56 PM
Looked at a 67 today in the showroom of a Ford dealer. It seemed all the gaps where fiberglass met the body were filled with black silicone. On a Lime Gold car it made quite a contrast. Is that the way they should be done? Would a 68 be similar?

Pat
Title: Re: Fiberglass and body lines
Post by: Coralsnake on July 06, 2023, 06:30:27 PM
No 1968 cars did not use a black sealant.

It was clear in 1968
Title: Re: Fiberglass and body lines
Post by: azdriver on July 06, 2023, 06:42:20 PM
 ;)Thanks

Pat
Title: Re: Fiberglass and body lines
Post by: Bob Gaines on July 06, 2023, 09:48:47 PM
67 Shelby's typically used clear silicone from the factory.
Title: Re: Fiberglass and body lines
Post by: 557 on July 07, 2023, 06:55:09 AM
And there were gaps aplenty with that original fiberglass.... ;)
Text only | Text with Images