Because of someone's desire for wide tires way back, I need a pair of the rear axle bumper brackets that mount to the frame rail on each side. I realize this is a pain in the ass part that will probably have to be cut out of a frame, but more than willing to pay the time for somebody to do it. I need them intact with the spot welds. Pretty sure any first generation mustang is the same. Some pitting OK but no rotted through pieces please. Email direct TimothyLea7@gmail.com
Should've checked eBay first, guy had a pair already to go. Thanks.
Tim, just remembered that there are a set of rear frames in my rust "garden."
If still interested, let me know.
Mmmm, now which neighbor borrowed my Sawzall? Joe
Image rotated...
Thanks for the fix, didn't know how to do that
"Paint" is a very basic Image editing program that is supplied on many computers.
Do a search for it on your system (if using a laptop or tower) not sure about cell phones.
Open Paint and then while in Paint open the image you want to modify and select the "rotate" option tool and select the direction you want to rotate the image and then save or rename and save, then post or repost it.
See attached...
Hope this helps...
Got it, never too old to learn, Joe