Looking for recommendations for a stock replacement cam for my KR. Car is a 4-speed with A/C, ps and pb.
Thanks, Pete.
I am not an expert. I have been told that a Lunati #10503 is a clone and that a comp cam #265 DEH is a modern replacement. I have never used either. I hope this helps. Royce has built many engines , and will know.
We've had good luck with the Melling MTF-4.
I've been using the Comp Cams 268H-10 grind in 427 and 428CJ's for years. It's a good choice. Smooth idle, lots of vacuum. A little more cam than the stocker but not much more.
That Comp 268 H sounds like what I need. Thanks for the input.
Pete.
Quote from: Royce Peterson on March 30, 2023, 06:35:58 PM
I've been using the Comp Cams 268H-10 grind in 427 and 428CJ's for years. It's a good choice. Smooth idle, lots of vacuum. A little more cam than the stocker but not much more.
Most excellent choice