NOS Rotunda bulbs, three-prong, 4002 low-beams each in its original box, shook each bulb and no rattles, never been powered up or installed. These bulbs have the etched "FoMoCo" logo in the centers and have the small "TS" logo cast into the bottom of the glass.
Bulbs are now listed in Ebay
Are these the smaller 4002 low beam for the 4 bulb system or the larger size bulbs for the two bulb system? I can't distinguish size from the picture.
Will you power up bulbs to confirm working order?
Middle pole is neutral . The pole on ether side will light high or low.
Quote from: alex74pd184 on March 06, 2023, 10:06:18 PM
I'll have to look into that too. If I remember correctly, the top center would get a red wire (low beam) function, right side would get green wires(high beam) and the left side would get black wires to ground?
For testing negative to center. Positive to ether side will light ether high or low. They both don't have to be on at the same time to confirm that they work like in a working car situation.