Text only | Text with Images

SAAC Forum

Deals and Appeals => Parts For Sale => Topic started by: SFM5S000 on February 05, 2023, 10:53:54 PM

Title: Bud Moore Shock Tower spacers
Post by: SFM5S000 on February 05, 2023, 10:53:54 PM
Okay, this is not a Shelby part. Instead of putting spacers under the mount of the top of the front shock. Most folks think this is to prevent the shock from bottoming out because the upper A arms were lowered. WRONG
It places the piston on the shaft towards the center of the piston travel. Race tracks are smooth. The piston is NOT going to bottom out! This was a Bud Moore piece.
I have two (2) sizes/thickness' for sale
1/4" $75.00 pair
Or
3/8" $75.00 pair

Once they are painted they disappear when mounted

Cheers,
~Earl J
Title: Re: Bud Moore Shock Tower spacers
Post by: SFM5S000 on February 05, 2023, 10:59:12 PM
More pics

~E
Title: Re: Bud Moore Shock Tower spacers
Post by: SFM5S000 on February 06, 2023, 09:00:35 PM
The 3/8" are SOLD

1/4" is left.

~E
Title: Re: Bud Moore Shock Tower spacers
Post by: SFM5S000 on February 26, 2023, 09:48:40 PM
The 1/4" spacers are SOLD.

~E
Text only | Text with Images