Text only | Text with Images

SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: 68cobra427 on January 30, 2023, 07:54:47 PM

Title: used 67 lower side scoop question
Post by: 68cobra427 on January 30, 2023, 07:54:47 PM
I understand there are differences. So what can someone tell me.
Title: Re: used 67 lower side scoop question
Post by: JD on January 30, 2023, 09:54:51 PM
Not like any of the typical '67 versions I've seen.  the two screw holes in the vertical recessed area between the car body and the scoop opening are more like what is on some '68 versions.  Others will know more...

Title: Re: used 67 lower side scoop question
Post by: Bob Gaines on January 31, 2023, 12:52:31 AM
It looks like smooth injected fiberglass . Injected fiberglass is the typical process for 68 scoops. .I have never heard or seen a 67 Shelby scoop made that way.
Title: Re: used 67 lower side scoop question
Post by: 68cobra427 on January 31, 2023, 10:57:54 AM
Was told possible 67, I tend to agree this is more for 68.  I received this and a nos pass 68 Shelby front fender extension at the same time. Along with a Nos 68 GT/CS drivers scoop in the ford box.

Thanks for your input .
Troy
Title: Re: used 67 lower side scoop question
Post by: JD on January 31, 2023, 11:04:14 AM
From Dominic posting some time ago, comparison of '67 vs '68 lower scoops...

Title: Re: used 67 lower side scoop question
Post by: 68cobra427 on January 31, 2023, 11:24:05 AM
We have a winner, based on the position of the holes and edging at opening , it is 68 group 1.   

Thanks JD
Text only | Text with Images