Need a full set of correct RBW fasteners to install a pair or original 1967 Shelby fiberglass fender extensions (end caps).
You might check the AMK catalog if you cannot find some originals. His bolts are really close to originals.
Are you referring to the AMK Products Part No. B-11540 (5/16 x 18 x 15/16 HX .88 CONI SEMS LP "RBW" Cadmium/Wax Finish)?
Link, scroll down on link...
https://www.amkproducts.com/i-kits/ford-individual-fastener-kits/?year_=1967&model=Mustang&category=Body
See attached...the F-3292 Kit and parts
Hope this helps
Quote from: JD on January 13, 2023, 03:22:23 PM
Link, scroll down on link...
https://www.amkproducts.com/i-kits/ford-individual-fastener-kits/?year_=1967&model=Mustang&category=Body
See attached...the F-3292 Kit and parts
Hope this helps
That is the correct bolt and finish however technically RBW was the typical makers mark on the bolt head and not SEMS. A small detail for those who want to be most correct.