Text only | Text with Images

SAAC Forum

The Cars => 1969-1970 Shelby GT350/500 => Topic started by: 68stangcjfb on January 12, 2023, 11:28:34 AM

Title: GT350 rear end question.
Post by: 68stangcjfb on January 12, 2023, 11:28:34 AM
Did 69/70 GT350s get "N" case rear ends with 31 spline axles?
Title: Re: GT350 rear end question.
Post by: crossboss on January 12, 2023, 12:42:31 PM
Thats a good question. I have been around these cars for years, and I haven't seen the 1969/70 GT-350s with N cases or 31 spline axels. That said, I could be wrong....
Boss 302s, yes.
Title: Re: GT350 rear end question.
Post by: CSX4781 on January 12, 2023, 01:05:28 PM
Best I can determine, based on my car (#362) which the rear end had never been removed or disassembled until I got it (still had the copper washers and tag installed), I'd say no. Mine has the standard case and 28 splined axles, and it is the 3.25 traction lok that it is supposed to be. Tag says 'WFB-C, 3L25'. Hope this helps.

Dave
Title: Re: GT350 rear end question.
Post by: shelbymann1970 on January 18, 2023, 12:29:29 PM
My answer would be no based on my car having a 3.25 traction lock, no N case and 31 spline axles and being all original.
Build sheet for #2368 the rear end code is 9984AER. My build sheet is wasted in that area.
Text only | Text with Images