Hi all,
Do you know if the Ford small block tri-power set up came with tags? All three carbs? The ford part numbers are C4AF-9510-U and C4AF-9510-V. I would like to have some tags made up, but it they did not come with tags, not need to spend the money.
Thanks
Cory
Cory,
My setup doesn't have tags, but I do not know the entire history of it. It has probably been apart many times. In my research I haven't found any photos or discussion of tags, but at that doesn't mean much. Hopefully someone with a long ownership history can help. Here are a few pictures of mine how I bought it.
(http://www.saacforum.com/gallery/44-070618194258.jpeg)
(http://www.saacforum.com/gallery/44-070618194342.jpeg)
(http://www.saacforum.com/gallery/44-070618194440.jpeg)
Hi Brain,
I am going to check the old SAI catalogs tonight and see if any tags can be seen in the period photographs.
Also, can you confirm the metering blocks on your carbs are 3563 with LIST 2882 and 3673 with LIST 2881. Last, what are the date codes?
Thanks for sharing
Cory
Quote from: 6s1640 on June 07, 2018, 08:02:42 PM
Hi Brain,
I am going to check the old SAI catalogs tonight and see if any tags can be seen in the period photographs.
Also, can you confirm the metering blocks on your carbs are 3563 with LIST 2882 and 3673 with LIST 2881. Last, what are the date codes?
Thanks for sharing
Cory
Cory,
I apologize, I have the early setup, not the later setup.
Here is the carburetor numbers I have.
List # Metering Block Date
Front: 2868 3563 391
Middle: 2867 2633 391
Back: 2868 6343 391
Quote from: silverton_ford on June 08, 2018, 12:42:18 AM
Quote from: 6s1640 on June 07, 2018, 08:02:42 PM
Hi Brain,
I am going to check the old SAI catalogs tonight and see if any tags can be seen in the period photographs.
Also, can you confirm the metering blocks on your carbs are 3563 with LIST 2882 and 3673 with LIST 2881. Last, what are the date codes?
Thanks for sharing
Cory
Cory,
I apologize, I have the early setup, not the later setup.
Here is the carburetor numbers I have.
List # Metering Block Date
Front: 2868 3563 391
Middle: 2867 2633 391
Back: 2868 6343 391
Hi Brian, Thanks for posting. It is interesting the two 2868 carb's have different metering blocks. Is that right?
Below is my set up.
Position LIST No. Metering Block Date Ford Part No.
Front 2882 3563 392 C4AF9501V
Middle 2881 3672 391 C4AF9501U
Back 2882 3563 392 C4AF9501V
These number are consistent with a set up currently on auction.
https://www.ebay.com/itm/FORD-TRI-POWER-260-289-carburetors-manifold-air-cleaner-1964-HIPO-w-fuel-log/232786208743?hash=item363323a7e7:g:dR0AAOSwmBxa4Sbf
I could not see any tags on the old Ford and SAI ads or catalogs.
Cory
Quote from: 6s1640 on June 08, 2018, 02:24:18 AM
Hi Brian, Thanks for posting. It is interesting the two 2868 carb's have different metering blocks. Is that right?
Cory, Yes my numbers are correct with what I have. I had to double check a couple times. I am not sure what they are supposed to be. I haven't researched enough yet. I need to get to the bottom of it, because I plan to run this setup on my 1930 Model A Roadster.
- Brian
Hi Brian,
Any markings on the intake? I find none on mine. IIRC, I have heard some had BUDDY BAR markings, but I could be mistake. I have not been able to find much info on these set ups on the internet. Mustangtek list this set up with no markings under intake manifolds.
Cory
Hi Brian,
Any markings on the intake? I find none on mine. IIRC, I have heard some had BUDDY BAR markings, but I could be mistake. I have not been able to find much info on these set ups on the internet. Mustangtek list this set up with no markings under intake manifolds.
Cory
[/quote]
I have a Tri-Power on 6S1348 that I put on in the 80's. As I remember it had BUDDY BAR in the bottom. I do admit that was about 35 years ago so I may be wrong. There is a date marking of 9 64 cast into the top of the thermostat housing on the outside.
Here are the numbers. I will have to look again for two of the metering blocks.
There were no tags on the carbs when I got them. I have had five sets of carbs over the years and do not remember any carb tags. Of course that does not meany any thing.
Part Number
Front C4AF-9510-V List 2882
Middle C4AF-9510-U List-2881
Back C4AF-9510-V List 2882
Date Number
Front 502
Middle 584
Back 502
Metering block
Numbers
Front
Middle 3673
Back
Hope this is helpful...
Les
6S1348's Day Two addition of Ford Tri-Power. Added in the 1980's after finding it in a garage covered with dog hair.
Air cleaner studs are fabricated because the top is from a 2x4 system and the spacing is different.
For years I always had problems with the carb gaskets leaking fuel when starting after sitting for long periods of time.
Newer gaskets seem to not shrink with time like the earlier ones.
Note the casting date code 9 64...
(http://www.saacforum.com/gallery/394-110618101124.jpeg)