Print Page - Aluminum Engine ID Tag location

Title: Aluminum Engine ID Tag location - 351 Windsor
Post by: BlackJadeGT350 on March 23, 2022, 04:47:09 PM

Hi all,

I'm reviewing the MCA 1969 - 1970 Shelby Concours Trailered/Driven document and for the aluminum engine ID tag it says it needs to be in the correct location and visible. Mine is attached on a bolt that holds the coil mounting in place. It is not visible at all. I'm trying to find a picture of where it should correctly be. Based on researching online it sounds like mine is in the correct location. Just not seeing how it can be "visible". I've attached a picture of mine. To get this picture I had to wedge my phone where no human eye could see.

Anyone have a picture they can share with the correct location of the tag?

Thanks!
Eric

Title: Re: Aluminum Engine ID Tag location - 351 Windsor
Post by: TOBKOB on March 23, 2022, 05:38:44 PM

Looks correct to me... :)

TOB

Title: Re: Aluminum Engine ID Tag location - 351 Windsor
Post by: J_Speegle on March 23, 2022, 07:11:36 PM

As you have found - tough spot to get or take a picture of

Here is an example of one on an unrestored car. Hope this helps

(https://www.concoursmustang.com/forum/gallery/17/6-230322191017-17103746.jpeg)

Title: Re: Aluminum Engine ID Tag location - 351 Windsor
Post by: BlackJadeGT350 on March 23, 2022, 07:15:24 PM

Thank you, that does help. And thanks for the picture!

Eric

SAAC Forum

The Cars => 1969-1970 Shelby GT350/500 => Topic started by: BlackJadeGT350 on March 23, 2022, 04:47:09 PM