SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: Greg on May 11, 2018, 02:24:14 PM

Title: Fan spacer for a 66 GT350
Post by: Greg on May 11, 2018, 02:24:14 PM
Does anyone have a good one that isn't pitted they are willing to sale, please PM me.   Thanks....

Greg
Title: Re: Fan spacer for a 66 GT350
Post by: Brant on May 11, 2018, 03:57:36 PM
Quote from: Greg on May 11, 2018, 02:24:14 PM
Does anyone have a good one that isn't pitted they are willing to sale, please PM me.   Thanks....

Greg

Lots of work was put in to these to them darn close.

http://www.virginiaclassicmustang.com/65-66-289-HIGH-PERFORMANCE-FAN-SPACER-WITH-CORRECT-FOMOCO-LOGO-P58907.aspx

(https://lh3.googleusercontent.com/cjSLVlComLbv9nuDz9Horp2Kni22K2D43yrODhu5CdthzC9xdQCY-IafO0sqdH4QPet61RfHDKYTaCl1OTA2rPFSVDngCw87HeQHgHse15hjMXGJoe1Un1RlclfyLFSfwQJLzRaYW3aBh5JzFzS1rY1bEomEi2pFtlyNgSKodgSY7cspzoJmCHhti-I3K6fndlZa0K1ACfwNFPQH6apsMlChwITLbS16DXeHoziOLGQq2EbhrOFO_410kggp8xYaviYZbtJV8Ev0Hb4k7-KtQvRpDNcpY1r0qxYamotSXCpSqjMVYwIWIIvjgChxitfRv1AlGouEAbs-IPSqKlDm7NnRZlz3pEZQ3Hv-2jdE3KVTUKVA97pgpYoKlWpRVIbx6w4n-fub__2cofFowq2eBQmqaIlGrsiJkMNUnt39hsBAeowsE5F9eXXAqU5HdqyJ60qHlsXHLm4XGp7OVJBs73FCR_BJkKXOE_vtejeQKxXqrqchO8E1aYJPyUiTmAY2pIQ5dixAnMCiRviMyMOofNjBnKkAV498h-Cn0C_bv1MNcgxU48chwj_5VPN9HSpdV7umz4ibJKJ2dqGsUeAPOxsH0VrukHU4_v0p4h4=w500-h376-no) (http://www.virginiaclassicmustang.com/65-66-289-HIGH-PERFORMANCE-FAN-SPACER-WITH-CORRECT-FOMOCO-LOGO-P58907.aspx)

(https://lh3.googleusercontent.com/ShL4hXPwmQMZpu7SUhrxbDddv84Y6HKnO0wfbqBHTBKXvHD4-KYEkBMvOFElTTUDRn4r4XGy64bvu4TbLBc-ZzwqwpgOP7Lct8OsCVhJG2RYz25ZqADpmF8k_oKl39xRP2e6YdG3U9J3CNwXcOuTgzr4GiTN5bQ8bEOh6UHvuumfUuMmrgku82tcVs0h8hQ_KB57iTv20S-osX-yuMaYEp4KjLZLBSKmdaO4mu6gkTDGavN7YZnZBHYtyAN4OuSPpvRRM7m5l2JzNafQHqBDGb3dZjP0HCUYLaKCvFq3H5KKi62LbLfYdkx9v0DHvOT5CpqshYWDSNVD5Ml5_fuyrVqLNFKCVmgLNCrd4HF83Ocg4J0owFW_osStbLNz-lTbzpX3Q2eEJK-BEnsPcH0wIVYGwtikD13bddLzQWAs53hi5ayyF_QZML2AI_uGlywbmtg6-fBW_soNwN0ESHbkzMujfDMVv70MNzw7MBM7A4ly6pxo52-7WrkZDETAAyeH8JyYs9aRqeVG6jFv9PSh__MW30W8El9YCPSPfS2eesRFsgab13KplecLS5mnxkt3tmnKAPOoA2sKGVGqLzTGNUs7KwvMzapW94t56RQ=w400-h536-no) (http://www.virginiaclassicmustang.com/65-66-289-HIGH-PERFORMANCE-FAN-SPACER-WITH-CORRECT-FOMOCO-LOGO-P58907.aspx)
Title: Re: Fan spacer for a 66 GT350
Post by: Greg on May 11, 2018, 04:47:28 PM
Thanks Brant, I would like find an original if possible but I may have to go that route if no one has a good one. 
Title: Re: Fan spacer for a 66 GT350
Post by: sfm5s081 on May 11, 2018, 05:59:54 PM
funny, I run a 66 Virginia Mustang one on my 65. 
Title: Re: Fan spacer for a 66 GT350
Post by: Bob Gaines on May 11, 2018, 08:55:35 PM
Quote from: sfm5s081 on May 11, 2018, 05:59:54 PM
funny, I run a 66 Virginia Mustang one on my 65.
Nothing wrong with it IMO . I have a original and the repro on display engines and the only way you can tell is that the original is a little more distressed in comparison in my case.
Title: Re: Fan spacer for a 66 GT350
Post by: Dan Case on May 12, 2018, 03:35:42 PM
Quote from: Bob Gaines on May 11, 2018, 08:55:35 PM
Quote from: sfm5s081 on May 11, 2018, 05:59:54 PM
funny, I run a 66 Virginia Mustang one on my 65.
Nothing wrong with it IMO . I have a original and the repro on display engines and the only way you can tell is that the original is a little more distressed in comparison in my case.

At least some originals were made in a magnesium alloy and were subject to significant corrosion in wet or wet and salty locations.
Title: Re: Fan spacer for a 66 GT350
Post by: Bob Gaines on May 12, 2018, 05:25:00 PM
Quote from: Dan Case on May 12, 2018, 03:35:42 PM
Quote from: Bob Gaines on May 11, 2018, 08:55:35 PM
Quote from: sfm5s081 on May 11, 2018, 05:59:54 PM
funny, I run a 66 Virginia Mustang one on my 65.
Nothing wrong with it IMO . I have a original and the repro on display engines and the only way you can tell is that the original is a little more distressed in comparison in my case.

At least some originals were made in a magnesium alloy and were subject to significant corrosion in wet or wet and salty locations.
I have one in magnesium also . It is darker and a little lighter. At least I have always thought it was magnesium . Let me get my torch out and double check ;) :D