Text only | Text with Images

SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: peterj9#388 on September 24, 2020, 09:00:06 PM

Title: C6 Transmission for 1967 GT500
Post by: peterj9#388 on September 24, 2020, 09:00:06 PM
Looking for the correct transmission for my car. Previous owner removed and lost it 40 years ago.
Thanks
Title: Re: C6 Transmission for 1967 GT500
Post by: 67_1183 on October 01, 2020, 11:11:50 AM
From 67410F2A02940 per VCM and Maple Hill photos.

PGB R, H servo and aluminum tail shaft.

Edit: Looking at the tag photo there is a 1 under the grease by the bolt.  PGB R 1
Title: Re: C6 Transmission for 1967 GT500
Post by: 67_1183 on October 01, 2020, 11:30:05 AM
Supplied in a post by forum member rbarkley.
Title: Re: C6 Transmission for 1967 GT500
Post by: Bob Gaines on October 01, 2020, 01:17:30 PM
My tunnel vision was thinking aluminum but reading iron.  :o 390 C6 Mustang core will be the same .Floor shift lever is essential for it to work in a Mustang/Shelby.If missing most likely means it was from a full size column shift car. fortunately the hard to find floorshift assembly version is know available as a accurate repro. 
Title: Re: C6 Transmission for 1967 GT500
Post by: peterj9#388 on October 01, 2020, 04:50:39 PM
Thanks for the info. Would be great to get the aftermarket shifter info Bob.  Does anyone have a usable transmission ?

Thanks
Peter
Title: Re: C6 Transmission for 1967 GT500
Post by: Bill on October 02, 2020, 05:55:12 AM
Please PM original poster if you have what he is searching for.

Please take discussion to a section of this forum outside of the classified subsection  ::)
Text only | Text with Images