Print Page - 67 Jack and jack handle

Title: 67 Jack and jack handle
Post by: 7777kx on March 11, 2018, 03:02:44 AM

Would any forum member have an original jack and jack handle, which would be suitable for 67 500 #1325, which is running 10-spokes.
Good price paid, many thanks Alan
email: faulknerstevens@btinternet.com

Title: Re: 67 Jack and jack handle
Post by: kingchief on March 11, 2018, 09:48:57 AM

Try Mansfield Mustangs if no one has any originals. Their website indicates they have some originals with photos!

Steve

Title: Re: 67 Jack and jack handle
Post by: JD on March 11, 2018, 11:11:39 AM

Standard Ford Mustang San Jose items for a '67 Shelby with 10-spokes or Hub caps/Wheel Covers.

13/16 end on the wrench - cast bell end with stamped steel handle and 13/16 nut on scissor jack.

Should not be hard to find.

There was a thread on the old forum, will start a new one...

Title: Re: 67 Jack and jack handle
Post by: Bob Gaines on March 11, 2018, 05:25:39 PM

FYI there was a typical SJ jack that is not as common as the Dearborn and Metuchen jacks . They have different screw configurations.PM sent

SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: 7777kx on March 11, 2018, 03:02:44 AM