Looking to see if anyone has an old cobbled up taillight harness for a 1967 as I just need one of the taillight bulb sockets and would french it in along with the others. Pictures attached show how mine is set up now and it looks like somewhere along the way one of the sockets must have failed or gotten damaged so was replaced with a more universal one.
Note the chrome cap nuts to relieve the owner of all the cuts from the taillight box studs sticking out!
Thanks for the consideration.
Randy
Hey Randy,
If you can't find one with the correct rubber boot, you can get reproductions of the entire harness specific to 67 Shelbys:
https://www.virginiaclassicmustang.com/67-SHELBY-TAIL-LIGHT-WIRING-EXTENSION-PLUG-SET-BOTH-SIDES-P2362.aspx
Quote from: Shelby_r_b on May 06, 2020, 09:49:20 AM
Hey Randy,
If you can't find one with the correct rubber boot, you can get reproductions of the entire harness specific to 67 Shelbys:
https://www.virginiaclassicmustang.com/67-SHELBY-TAIL-LIGHT-WIRING-EXTENSION-PLUG-SET-BOTH-SIDES-P2362.aspx
FYI the repro uses the incorrect gauge wire,incorrect wire color and the wrap type is only applicable to about half of 67 Shelby production.