Hi all,
Can some post this article. I can not find on the internet. It makes a nice reference for all the C4 equipped 66 GT350 owners.
There is an image in the article that shows which two holes in the valve body separation plate that can to be drilled to meet the HiPo C4 specifications.
Thanks
Cory
I have a copy of the article but it's not the best quality. I would scan it but my scanner is on the blink. I have a notation that it's from the May-June 2007 issue of FAIRLANER magazine if that's of any help.
Craig R
Found the link to the article. Hope this works. You'll need to copy/paste it into your browser.
file:///Users/newuser/Downloads/289-HiPo-C4%20(1).pdf
Craig R
Quote from: SHELB66 on March 24, 2018, 12:36:23 PM
Found the link to the article. Hope this works. You'll need to copy/paste it into your browser.
file:///Users/newuser/Downloads/289-HiPo-C4%20(1).pdf
Craig R
I was not able to get it to work. Anyone else?
Not able either...
Sorry about that. I found it by using Google and typing in "Bob Mannel transmission". The PDF info to click on for download is towards the bottom.
Craig R
I, too, had problems opening the link a few years ago when I acquired Bob's article. Somehow I was able to get/make a PDF copy of the article.
Attached is a copy of my copy for all to have.
Frank
Quote from: OldGuy on March 24, 2018, 09:56:27 PM
I, too, had problems opening the link a few years ago when I acquired Bob's article. Somehow I was able to get/make a PDF copy of the article.
Attached is a copy of my copy for all to have.
Frank
Hi Oldguy,
Thank you. That is the one.
Take care
Cory
Quote from: 6s1640 on March 24, 2018, 10:29:53 PM
Quote from: OldGuy on March 24, 2018, 09:56:27 PM
I, too, had problems opening the link a few years ago when I acquired Bob's article. Somehow I was able to get/make a PDF copy of the article.
Attached is a copy of my copy for all to have.
Frank
Hi Oldguy,
Thank you. That is the one.
Take care
Cory
+1. Thank you.
Corey,
Besides drilling holes you need the inexpensive shift kit from Transgo , SK C4. This uses the original springs from the hi po valve body. PM me if you have any questions . I've recreated more than a few.
Randy