Text only | Text with Images

SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: B Devlin on May 29, 2019, 06:47:53 PM

Title: GT 500 Heater Hose Fitting & Air Filter Wing Nuts
Post by: B Devlin on May 29, 2019, 06:47:53 PM
Folks,

I'm looking for a source for the correct 90 degree intake manifold-heater hose fitting, and air filter wing nuts, for a big block. If it matters, the car is a very late production: 3179.

Any help will be much appreciated.

Thanks,
Bill
Title: Re: GT 500 Heater Hose Fitting & Air Filter Wing Nuts
Post by: corbins on May 29, 2019, 07:38:12 PM
Try Mansfield Mustang... Bill is a very nice guy .
Title: Re: GT 500 Heater Hose Fitting & Air Filter Wing Nuts
Post by: B Devlin on May 29, 2019, 07:45:48 PM
I'll do that, thank you.

Bill
Title: Re: GT 500 Heater Hose Fitting & Air Filter Wing Nuts
Post by: jswoody on May 29, 2019, 09:20:09 PM
Definitely Mansfield Mustang.  I just purchased both fittings there.  Bill is extremely knowledgeable and helpful. 
Title: Re: GT 500 Heater Hose Fitting & Air Filter Wing Nuts
Post by: gt350hr on May 30, 2019, 11:18:21 AM
  MILLIONS of carburetted Ford products used the same wing nut From Pintos , to F350s . The heater elbow from Mansfield is spot on.
Title: Re: GT 500 Heater Hose Fitting & Air Filter Wing Nuts
Post by: B Devlin on May 30, 2019, 04:42:58 PM
Thanks, Randy.
Text only | Text with Images