Excellent topic Pete.
May I suggest someone post a topic on the 67 steel wheels. My limited experience is that the vent slots are shaped differently.
Quote from: Kent on February 19, 2020, 01:48:37 PM
I heard that the Shelby 1968 wheels are the C8AZ-1007-B part number and the wheels were marked with a C8AA number, is that true because I have never seen them with this number
Paper stick on labels were pretty typical but didn't last long/hold up well
Ok good to know. If there are more infos about steel wheels, lets go. All in one thread should help.
I believe the 1967 wheels have three slots and three nubs in the center. Of course, date codes
Quote from: 68blk500c on February 19, 2020, 09:40:01 PM
Excellent topic Pete.
May I suggest someone post a topic on the 67 steel wheels. My limited experience is that the vent slots are shaped differently.
Don
Here are some photos of the steel wheels used on 1967 Shelby's
Rodney
A few more photos of the 67 Shelby steel wheels
Rodney
Quote from: Coralsnake on February 20, 2020, 07:19:59 AM
I believe the 1967 wheels have three slots and three nubs in the center. Of course, date codes
Pete
The 67 steel wheels are four slots with three nubs, see photos posted above.
Rodney
I am wondering if there is a change over during 67 model year? Thanks
Quote from: Coralsnake on February 20, 2020, 12:06:25 PM
I am wondering if there is a change over during 67 model year? Thanks
I have a set of wheels that have 66 stamped on the hub, identical to the 67s pictured, with the KW and month stamp...those still have 4 slots and 3 knubs. not sure i have ever seen a wheel with 3 slots.
Quote from: Kent on February 20, 2020, 05:09:27 AM
Ok good to know. If there are more infos about steel wheels, lets go. All in one thread should help.
Actually it is better for others searching in the future as a stand alone thread. I will ask moderator to split it out.
Maybe 3 was the nubs, does that work?
Quote from: Coralsnake on February 20, 2020, 02:07:37 PM
Maybe 3 was the nubs, does that work?
4 slots and 3 nubs just like in Rodney's picture reply #50.