I made another minimum order of these and have some left. used the same dimension smooth edge bar stock material and bent to the same specs as the originals. $85 postpaid ! Paypal friend and family is the best but Ill take CC or check 920 434 3645 jim@shelbyparts.com
when installing this part, do new holes need to be drilled, or does it utilize existing nuts/bolts?
thanks.
alan
They utilize the seat belt bolt threads that extend through the floorpan in the driveshaft tunnel. Two 7/16 -20 jamb nuts to my recollection.
-Keith
Quote from: 1967 eight barrel on February 17, 2019, 05:43:51 PM
They utilize the seat belt bolt threads that extend through the floorpan in the driveshaft tunnel. Two 7/16 -20 jamb nuts to my recollection.
Thats the ticket laddie!
-Keith