SAAC Forum

The Cars => 1967 Shelby GT350/500 => Topic started by: sfm5s081 on April 05, 2018, 05:35:29 PM

Title: 67 GT500 trunk. Spare, jack and wrench placement
Post by: sfm5s081 on April 05, 2018, 05:35:29 PM
Just wondering if someone could post a pict of how the Spare, jack and lug wrench mount in the trunk.

Thanks
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: sfm5s081 on April 13, 2018, 12:43:07 AM
anybody? Bueller?
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: J_Speegle on April 13, 2018, 01:06:47 AM
Allot of members of the site are having difficulty posting any pictures to the site right now if you'll notice allot of the threads and comments about the difficulties

Picture is going to be difficult since they are under the wheel when mounted. Might want to start with the jacking instruction sticker illustration on the car
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: sfm5s081 on April 13, 2018, 12:53:03 PM
Quote from: J_Speegle on April 13, 2018, 01:06:47 AM
Allot of members of the site are having difficulty posting any pictures to the site right now if you'll notice allot of the threads and comments about the difficulties

Picture is going to be difficult since they are under the wheel when mounted. Might want to start with the jacking instruction sticker illustration on the car

Sadly, I do not have the sticker
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: J_Speegle on April 13, 2018, 01:32:37 PM
Quote from: sfm5s081 on April 13, 2018, 12:53:03 PM
Sadly, I do not have the sticker

From an out take of a jacking instructions I had taken for another project

(http://www.concoursmustang.com/forum/gallery/10/6-130418133129.jpeg)
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: Bossbill on May 20, 2018, 04:36:35 PM
In this post:
http://www.saacforum.com/index.php?topic=1062.0
there was a comment about what the judges would like to see in regard to jack and handles.

If the car is being judged is the jack and handle stowed under the tire and therefore mostly invisible?
Or do we pull the jack, handle and tire out of the way so the judges can see all of the details (like the jack sticker)?

I'm a bit away from showing the car, but ...
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: Bob Gaines on May 20, 2018, 05:05:25 PM
Quote from: Bossbill on May 20, 2018, 04:36:35 PM
In this post:
http://www.saacforum.com/index.php?topic=1062.0
there was a comment about what the judges would like to see in regard to jack and handles.

If the car is being judged is the jack and handle stowed under the tire and therefore mostly invisible?
Or do we pull the jack, handle and tire out of the way so the judges can see all of the details (like the jack sticker)?

I'm a bit away from showing the car, but ...
You should display it like it is shown on the correct jacking instruction sticker .You would be surprised at how much the judges can determine even with the jack,handle etc. stowed properly.
Title: Re: 67 GT500 trunk. Spare, jack and wrench placement
Post by: Bossbill on May 20, 2018, 10:37:56 PM
Thanks Bob.