Messages

Thanks Bob!

What Tire did my car have originally? Marti report says Goodyear, registry says E70-15 but I'm seeing some tires with just Goodyear raised white letters and some that also say Polyglass GT. What is correct?
Thank you

Thanks Bob

Thanks Bob, I didn't think that would be an issue but I wanted to make sure, I couldn't imagine that Ford would put out something like that..do you have any recommendations on someone to check out the gauges or is there an easy do it yourself test that a non electrical minded person can do? The old wiring on my console had been fried so I've got new wiring for all of it. Don't know why it was fried though.

Thanks Guys, I have a reprint of the Blue set that has volumes 1-5 but I don't find a Shelby section. 
Bob, I've been told by a couple of people that I should bypass the Amp gauge because it's a fire hazard, what's your opinion?

I think the KR moniker should have been used on the SCJ since most 69-70 500s had the 428cj So as the difference the standard 500 from the KR. JMHO

Does anyone have a wiring diagram for 69 GT350 console gauge under hood wiring harness? I've got all the diagrams I can find from the assembly Manuel to the Shelby special Parts Pamphlet but nothing I have tells me what goes where From the firewall to the junction box and solenoid.
Thanks

My original has the black button with metal bezel on my 69 but the replacement from NPD  had two flat spots on the metal bezel, what's the right part number?

Thanks Bob, hopefully he will reply. I'd like to get that original look and I'm not sure that I would drive the car much when I'm done anyway but just tying to kill two birds with one stone.

Is there a radial tire reproduction that looks like the Goodyear original style Lettering tire? I've seen the bias ply Original reproduction But I was hoping to get the original look but radial drivability.

Thanks guys I appreciate it, would you believe I made that spelling error on purpose...I didn't think so. 😂😂😂

Anyone have automatic shifter laying around that they can give me the diameter of the hole the shift arm goes into?
See pictures On lever and the replacement bushing. I have the bushing from NPD and it won't fit in the hole... I had to use a lever from a different shifter as my original disappeared during a move but don't know what year the lever was from as no part on that shifter has part number. I can drill it out but want to be right the first time. Any thoughts?

Thanks guys, I appreciate the suggestions.

Any suggestions for One battery that will take the original looking cover Better then others?

I can't tell if the washers are on top of the printed circuit or underneath.