Text only | Text with Images

SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: pony428 on February 27, 2024, 11:20:03 PM

Title: 1968 GT350 crank pulley.
Post by: pony428 on February 27, 2024, 11:20:03 PM
I'm looking to purchase a 3 row crank pulley for my 302 engine with AC.
The part number is C8OE - 6312-B This is for my GT350 convert. 
Thanks for looking.
Ed

Title: Re: 1968 GT350 crank pulley.
Post by: Harris Speedster on February 28, 2024, 08:09:29 AM
Curious,
Does the three sheave pulley unbolt from the balancer ?
Is the C8 # you showed, on the balancer or the pulley's ?
Title: Re: 1968 GT350 crank pulley.
Post by: Coralsnake on February 28, 2024, 08:54:09 AM
Balancer is separate from pulley on 1968 302
Title: Re: 1968 GT350 crank pulley.
Post by: WT6066-2600 on February 29, 2024, 02:53:33 PM
Saw one here at West Coast Cougar Classic:

https://secure.cougarpartscatalog.com/c8oz-6a6312-b.html

which states "Ford part number C8OZ-6A6312-B. Application 289 and 302 engines with air conditioning and power steering optional. Ford casting number C8OE-6312-B. Triple sheave 68 crank pulley. While this pulley is identified as the available pulley over the Ford counter for this application, the C5AE-B pulley is what was installed on 1968 Cougars and Mustangs from the factory."

I have a C5AE-B pulley in my junk pile if you want it for free, just PM me.

Always willing to help fellow GT350 vert owner, Joe

Title: Re: 1968 GT350 crank pulley.
Post by: Harris Speedster on March 01, 2024, 12:06:46 PM

wt6066-2000
the C5AE-B pulley is what was installed on 1968 Cougars and Mustangs from the factory."
That is where I was going, that the C5 might be the same.?
Coralsnake, was referring to part number on each.
Didn't they have a cast iron 3 sheave pulley also, maybe C3 or C4 & I think, C5 ?

Title: Re: 1968 GT350 crank pulley.
Post by: Bob Gaines on March 01, 2024, 12:21:33 PM
Quote from: Harris Speedster on March 01, 2024, 12:06:46 PM

wt6066-2000
the C5AE-B pulley is what was installed on 1968 Cougars and Mustangs from the factory."
That is where I was going, that the C5 might be the same.?
Coralsnake, was referring to part number on each.
Didn't they have a cast iron 3 sheave pulley also, maybe C3 or C4 & I think, C5 ?
Not on a 68.
Title: Re: 1968 GT350 crank pulley.
Post by: Harris Speedster on March 02, 2024, 09:35:09 AM
A OK.
Thanks Bob.
John
Title: Re: 1968 GT350 crank pulley.
Post by: WT6066-2600 on March 03, 2024, 12:31:03 PM
Harris Speedster,

Here is the C5AE-B pulley that I used on a 68 small block with A/C and maybe the "same or at least similar" to C8OE-6312-B, never compared them dimensionally.  If anyone wants it for FREE just PM me before it hits the recycle bin.

Title: Re: 1968 GT350 crank pulley.
Post by: Bob Gaines on March 03, 2024, 01:45:06 PM
Quote from: WT6066-2600 on March 03, 2024, 12:31:03 PM
Harris Speedster,

Here is the C5AE-B pulley that I used on a 68 small block with A/C and maybe the "same or at least similar" to C8OE-6312-B, never compared them dimensionally.  If anyone wants it for FREE just PM me before it hits the recycle bin.
Sure I'll take it.PM sent.
Text only | Text with Images