News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

5S558 For Sale

Started by silverton_ford, May 15, 2018, 05:40:22 PM

Previous topic - Next topic

Dkutz

Quote from: Chad on May 24, 2018, 04:27:20 PM
I would post pictures but I can not figure out how to do it.  It says that something is full.

PM sent...

Silver Bullitt

Was the transmission crossmember and E-brake bar painted black from factory?

J_Speegle

Quote from: Silver Bullitt on August 24, 2018, 07:09:48 PM
Was the transmission crossmember and E-brake bar painted black from factory?

Trans cross member - Yes

Ebrake "bar" (if I understand what your describing)  - no
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

acman63

Quote from: Chad on May 24, 2018, 04:27:20 PM
558 was not switch from side exhaust to rear exit exhaust because there were no holes in the floor pans for the side exhaust  I would post pictures but I can not figure out how to do it.  It says that something is full.

Not all 65s with side exhaust had holes for hangers in the floor pan.  The explanation I got from some of the SA employees were that since the mufflers were just clamped on at SA  rather than welded , that once they were delivered they would start loosening up in use  as there was only the bracket left on the leaf spring . They instructed  the dealers to support the system with a strap bracket thus lots of dealers just drilled in to the floor pan tunnel
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member


Bob Gaines

Quote from: acman63 on August 24, 2018, 10:15:59 PM
Quote from: Chad on May 24, 2018, 04:27:20 PM
558 was not switch from side exhaust to rear exit exhaust because there were no holes in the floor pans for the side exhaust  I would post pictures but I can not figure out how to do it.  It says that something is full.

Not all 65s with side exhaust had holes for hangers in the floor pan.  The explanation I got from some of the SA employees were that since the mufflers were just clamped on at SA  rather than welded , that once they were delivered they would start loosening up in use  as there was only the bracket left on the leaf spring . They instructed  the dealers to support the system with a strap bracket thus lots of dealers just drilled in to the floor pan tunnel
Early cars did not have the extra strap used to hold the pipe where it turns out. The later cars typically came with the extra hanger. I think it was the early cars that may have got converted by Dealers to include the extra hanger if it became a problem. The extra hanger is pictured and included in the 65 Shelby exhaust picture.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Brant

If the exhaust is not welded and is clamped like original, you will find that it's almost impossible to keep it in place without those "hangers" on the floor pan also.

If it's welded all up, just the hangers at the leaf springs bolts (at the rocker) work fine by themselves.
-Brant

www.VirginiaClassicMustang.com

Subscribe to our Blog for the latest updates restoration projects and new parts information for 64 1/2-73 Mustangs!  http://blog.virginiaclassicmustang.com/

Like us on Facebook!  www.Facebook.com/VirginiaClassicMustang

Dkutz

Did 558 sell?  The website is not up anymore.  Would love to know where it ended up.

GT350Lad

Quote from: Dkutz on April 24, 2019, 12:23:52 PM
Did 558 sell?  The website is not up anymore.  Would love to know where it ended up.

+1
6S373
6S1276

Dkutz

I just found a cool pic of 558 on the day it was bought by the original owner.  Thought I would share here for future reference.  Would love to know where 558 is today.


texas swede

Thinking of the picture of the car and girl, my friend in Sweden was selling his 68 GT350 and he said to a prospective buyer
he wanted 100000 SEK for it but if the buyer was willing to take his wife with the car, he wanted 50000 SEK.
Texas Swede

Side-Oilers

Quote from: 69mach351w on August 24, 2018, 10:17:08 PM
Quote from: PaulD on May 23, 2018, 07:59:41 PM

What a cool period photo 8)


Remember when putting a STP sticker on your car (or bicycle) instantly made it cooler? 
Current:
2006 FGT, Tungsten. Whipple, HRE 20s, Ohlin coil-overs. Top Speed Certified 210.7 mph.

Kirkham Cobra 427.  482-inch aluminum side-oiler. Tremec 5-spd.

Previous:
1968 GT500KR #2575 (1982-2022)
1970 Ranchero GT 429
1969 LTD Country Squire 429
1963 T-Bird Sport Roadster
1957 T-Bird E-model

Bob Gaines

Quote from: Side-Oilers on January 20, 2023, 03:49:09 PM
Quote from: 69mach351w on August 24, 2018, 10:17:08 PM
Quote from: PaulD on May 23, 2018, 07:59:41 PM

What a cool period photo 8)


Remember when putting a STP sticker on your car (or bicycle) instantly made it cooler?
It also gave you another 10 HP too  ;D . at least that was what we wanted to believe.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

s2ms

Quote from: Bob Gaines on January 20, 2023, 04:59:48 PM
It also gave you another 10 HP too  ;D . at least that was what we wanted to believe.

I used have "part" ownership of a 1965 Dodge Dart, 273 2V, kind of a "community" car. We put every high performance sticker we could think of on the back side windows. The extra weight of the stickers made the car slower...
Dave - 6S1757

mr5oa

Quote from: texas swede on January 07, 2023, 05:18:53 PMThinking of the picture of the car and girl, my friend in Sweden was selling his 68 GT350 and he said to a prospective buyer
he wanted 100000 SEK for it but if the buyer was willing to take his wife with the car, he wanted 50000 SEK.
Texas Swede

That girl in the picture is my x wife and the mother of my two kids! lol. I think she's like 16 in this picture. I picked up on her when I was in my first car a 65 Mustang 2+2 that my daughter was conceived in the back with the seat folded down! True story
I do models