- Welcome to SAAC Forum.
News:
SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.
Recent posts
#1
Parts For Sale / Re: 1965 1966 Mustang Fastback...
Last post by Snydly289 - Today at 01:05:27 PMAdditional pics
#2
Parts For Sale / Re: 1965 1966 Mustang Fastback...
Last post by Snydly289 - Today at 01:04:52 PMAdditional pics
#3
Parts For Sale / 1965 1966 Mustang Fastback Pas...
Last post by Snydly289 - Today at 01:03:45 PMFor sale is a broken 65-66 Mustang Fastback passenger side louver vent.
It appears to be a clean break in the pot metal, no chunks are missing in the break.
Chrome vents are pretty decent with no major pitting but has some hazing and light scratches in the chrome (I buffed with OOOO steel wool prior to pictures)
However previous owner spray painted the inner webbing and inner stainless mesh with a satin black spray paint, as you can see in the pics.
Asking $100 plus shipping
It appears to be a clean break in the pot metal, no chunks are missing in the break.
Chrome vents are pretty decent with no major pitting but has some hazing and light scratches in the chrome (I buffed with OOOO steel wool prior to pictures)
However previous owner spray painted the inner webbing and inner stainless mesh with a satin black spray paint, as you can see in the pics.
Asking $100 plus shipping
#4
Parts For Sale / Re: 1965 1966 Mustang Fastback...
Last post by Snydly289 - Today at 12:57:13 PMAdditional pics
#5
Parts For Sale / 1965 1966 Mustang Fastback Lou...
Last post by Snydly289 - Today at 12:56:42 PMFor sale is a pair of 65-66 Mustang Fastback louver vent inner sliding doors.
These doors are complete, but have some rust on the inside of the panels as well as the some light surface rust on the outside (interior side of the panel).
The chrome has pitting and scratches on the sliding handle.
Asking $100 plus shipping
These doors are complete, but have some rust on the inside of the panels as well as the some light surface rust on the outside (interior side of the panel).
The chrome has pitting and scratches on the sliding handle.
Asking $100 plus shipping
#6
Parts For Sale / Re: NOS C7ZZ-3494-A 1967 Musta...
Last post by Snydly289 - Today at 12:51:09 PMAdditional pics
#7
Parts For Sale / Re: NOS C7ZZ-3494-A 1967 Musta...
Last post by Snydly289 - Today at 12:50:40 PMAdditional pics
#8
Parts For Sale / NOS C7ZZ-3494-A 1967 Mustang P...
Last post by Snydly289 - Today at 12:50:13 PMC7ZZ-3494-A (engineering number stamped C7ZA-3494-B)
This is a one year only power steering hose that connects to the pump high-pressure hose at the insulator and then routes down to the valve body.
The Ford MPC indicates this hose was used up to June 19, 1967 production but actual changeover date on the production line varied due to production line stock. If your car's production date is close to this change over date you should check your control valve port size. If your car was built after 6-19-67 you will need the larger port C7ZZ-3494-B hose. (This information was attained from Dead Nuts On Concourse Restoration Website)
This hose has the smaller 7/16 inch control valve fitting for the early control valve, not the ? inch control valve fitting used on the later cars with the larger valve.
This hose has the small FoMoCo logo die stamped next to the engineering number, reproductions don?t. From my research, this hose is correct for early 67 HiPo 289 and 390 and early GT350/GT500 cars with the smaller control valve.
Asking $225 plus shipping
This is a one year only power steering hose that connects to the pump high-pressure hose at the insulator and then routes down to the valve body.
The Ford MPC indicates this hose was used up to June 19, 1967 production but actual changeover date on the production line varied due to production line stock. If your car's production date is close to this change over date you should check your control valve port size. If your car was built after 6-19-67 you will need the larger port C7ZZ-3494-B hose. (This information was attained from Dead Nuts On Concourse Restoration Website)
This hose has the smaller 7/16 inch control valve fitting for the early control valve, not the ? inch control valve fitting used on the later cars with the larger valve.
This hose has the small FoMoCo logo die stamped next to the engineering number, reproductions don?t. From my research, this hose is correct for early 67 HiPo 289 and 390 and early GT350/GT500 cars with the smaller control valve.
Asking $225 plus shipping
#9
Parts For Sale / Re: NOS C5ZZ-6513106-B Red Mus...
Last post by Snydly289 - Today at 12:42:30 PMAdditional pics
#10
Parts For Sale / Re: NOS C5ZZ-6513106-B Red Mus...
Last post by Snydly289 - Today at 12:42:00 PMAdditional pics