How would u ck it to know if good or bad?
Ohm meter?
Quote from: csheff on August 12, 2020, 10:30:23 PM
How would u ck it to know if good or bad?
Ohm meter?
Touch the red lead to the hot connector on the condenser. Place the black lead to the metal case on the condenser. The meter's needle should jump slightly to the right (toward 0-ohms), then should drop back to the left towards infinite resistance). Hold the leads in place for 15 to 20 seconds. Gary (did a google search for a professional low down. )
Quote from: csheff on August 12, 2020, 10:30:23 PM
How would u ck it to know if good or bad?
Ohm meter?
or if you like videos jump in at least to the 3 minute mark on this video and watch the first test. https://www.youtube.com/watch?v=cRzqnlbsvvU
Thanks Gary